Back to Vehicles
Toyota2018-2024Common Problems

2018-2024 Toyota Camry: Recall History

Recall History for 2018-2024 Toyota Camry - based on owner reports and NHTSA data

Get Personalized Help

Ask about specific issues with your Toyota Camry.

Ask MechanicGPT

Recall History for 2018-2024 Toyota Camry

Note about data completeness

  • The provided dataset shows no official recalls for the 2018-2024 Camry in the NHTSA database.
  • The dataset includes a single owner complaint for a 2019 Camry related to the engine/EVAP system (P0442) but no recall actions were recorded.
  • This is not a complete or official recall history for the model year range; it reflects only what’s included in the supplied data. Check NHTSA’s SaferCar.gov or Toyota’s official service notices for a full, up-to-date recall list.

Official Recall Status (2018-2024 Camry)

  • Recalls in dataset: None
  • Observed data: No recalls found in NHTSA database for this make/model in 2018-2024 range.
  • Practical takeaway: At the time of this data snapshot, there were no recorded safety or emissions-related campaigns for the Camry in this range within the provided data. Always verify with NHTSA or Toyota for the latest recall status.

Owner Complaints (from the same dataset)

  • Complaint summary (1 record)
    • Year of vehicle: 2019
    • Component: engine
    • Mileage at complaint: 39,801 miles
    • OBD Code: P0442
    • Description: Check engine light present with code P0442. Described as intermittent engine malfunction during highway driving. Dealer unable to diagnose root cause after multiple visits.
  • Interpretation:
    • P0442 is an evaporative emission control system (EVAP) diagnostic trouble code indicating a small EVAP leak.
    • The issue appeared intermittently on highway driving and was not readily diagnosed by the dealer, suggesting a leak that is small or intermittent, or a fault in an EVAP component that’s not consistently detected.
  • Implication for owners:
    • This is generally emissions-related, not a direct safety issue. However, an unknown EVAP leak can lead to higher fuel evaporation losses and potential emissions compliance concerns, and it may trigger a persistent check engine light.

What P0442 Means in a Camry EVAP System

  • High-level explanation:
    • P0442 indicates a small leak in the EVAP system, which traps fuel vapors from the fuel system and routing them to the intake for combustion rather than releasing them to the atmosphere.
  • Common causes (typical possibilities, based on automotive knowledge):
    • Loose, damaged, or missing gas cap
    • Loose or damaged EVAP system hoses or fittings
    • Faulty or sticking purge valve (solenoid that controls flow)
    • Leaking EVAP canister or seals
    • Cracked or damaged EVAP canister housing
    • Faulty leak-detection pump or other EVAP sensor components
  • Why it can be intermittent:
    • Small leaks may only manifest under certain conditions (e.g., after a fill-up, at certain temperatures, during heavy acceleration, or with a vent valve cycle). Highway driving can stress the system differently, potentially revealing intermittent leaks.

Safety and Emissions Impact

  • Safety: A P0442 / EVAP leak is not typically a direct safety risk. It is an emissions-related fault.
  • Emissions/Inspection: If your region has periodic emissions testing, a persistent P0442 may cause a failed test unless addressed. It can also affect fuel economy slightly and may cause the on-board diagnostic (OBD) system to keep a malfunction indicator lamp (MIL) on.

Practical Guidance for Camry Owners

  • Immediate steps:
    • Check the gas cap: Ensure it is present, properly tightened, and not damaged. If a loose or damaged cap is found, replace and re-test.
    • After any gas fill, observe whether the MIL reappears. If it goes off after tightening the cap, the leak could be cap-related; if it returns, further diagnosis is warranted.
  • Diagnostic path (typical dealership/independent shop approach):
    • Perform a smoke test of the EVAP system to localize leaks.
    • Inspect EVAP hoses, connections, and seals for damage or disconnections.
    • Test the purge valve and vent valve operation and electrical connectors.
    • Inspect the EVAP canister and related components for cracks or contamination.
    • Check for any applicable service bulletins or software updates related to EVAP on the specific Camry model year.
  • Maintenance/practical considerations:
    • If a leak is found and repaired, the MIL should extinguish after the fault is cleared and the EVAP monitor completes its self-checks. In some cases, multiple drive cycles may be necessary.
    • Consider requesting a smoke test and a full EVAP diagnostic rather than just aGas Cap replacement if the cap is not the issue.

2025 Cost Estimates for P0442-related Repairs (typical ranges; vary by region and labor rate)

Note: Costs assume non-warranty work and are general industry ranges as of 2025. If your vehicle is under warranty, many of these items may be covered.

  • Gas cap replacement (most common first check)

    • Parts: $10–$60
    • Labor: $10–$40
    • Estimated total: $20–$100
    • When it helps: If the cap is missing, loose, or damaged, this often resolves P0442 quickly.
  • EVAP purge valve replacement

    • Parts: $40–$200
    • Labor: $100–$300
    • Estimated total: $140–$500
    • Notes: If the valve is sticking or failing, replacing it often clears the code.
  • EVAP canister replacement

    • Parts: $200–$1,000
    • Labor: $150–$500
    • Estimated total: $350–$1,500
    • Notes: Canister replacement is more involved and is typically considered if leaks are found in the canister or surrounding lines.
  • EVAP hoses, lines, or seals repair

    • Parts: $20–$150
    • Labor: $80–$250
    • Estimated total: $100–$400
    • Notes: Replacing cracked or disconnected hoses or seals can fix leaks.
  • EVAP system leak detection pump/other sensors (less common)

    • Parts: $50–$350
    • Labor: $100–$350
    • Estimated total: $150–$700
    • Notes: Some Camry configurations use various sensors; failures can cause P0442.
  • Diagnostic/service charges

    • Diagnostic fee: $50–$150 (often credited toward repair if you have the work performed at the same shop)
  • Warranty considerations

    • Emissions-related components may be covered under applicable federal or state emission warranties for qualifying vehicles and mileage. Coverage specifics (duration and eligible components) vary by model year, state, and mileage. Check your owner’s manual, warranty booklet, or your local Toyota dealer for exact terms.
    • If the vehicle is under warranty or a related extended warranty, out-of-pocket costs may be reduced or eliminated.

Data Limitations and How to Stay Informed

  • Limitations of the provided data:
    • Only one owner complaint is documented, and there are no recalls listed in the dataset.
    • The absence of recalls in this data does not guarantee that no recalls exist; official recall status should be checked through NHTSA SaferCar.gov or Toyota’s official site.
  • How to monitor for updates:
    • Periodically check NHTSA’s recall database for your exact VIN and model year.
    • Register for Toyota recall notices or contact your local dealership for the latest information.
    • If you have ongoing EVAP symptoms, consider a proactive inspection even if no recalls are listed.

Quick Takeaways for Camry Owners (2018-2024)

  • Official recall status in the provided data: No recalls found.
  • The single documented complaint (2019 Camry) involved an intermittent check engine light with P0442 (small EVAP leak), not a reported safety issue.
  • If you see P0442:
    • Start with the gas cap check.
    • If the MIL returns, plan a diagnostic focused on the EVAP system (smoke test, hose/seal inspection, valve checks).
    • Expect potential costs in the range of a few hundred dollars if it’s a simple valve replacement or hose repair; more if the canister or multiple parts are involved.
    • Warranty coverage may apply; consult your dealer for a warranty status check.

What to Do Next

  • If your Camry shows P0442 or a persistent MIL:
    • Schedule a diagnostic appointment with a trusted mechanic or Toyota dealer.
    • Request a comprehensive EVAP diagnostic (not just gas cap) and a test plan to determine if the issue is a cap, valve, canister, or hose.
    • Ask for itemized estimates before any replacement work.
  • If you want the most current recall history
    • Check NHTSA SaferCar.gov with your VIN.
    • Contact Toyota Customer Service or your local dealership for the latest recall and service bulletin information.

This guide provides a practical, owner-focused view of the 2018-2024 Toyota Camry recall history based on the supplied data. If you’d like, I can tailor cost estimates to a specific year, trim, or region, or help draft a checklist for a dealership visit.


Frequently Asked Questions

The 2018-2024 Toyota Camry has several known issues that vary by model year. See our detailed guide for specific problems, causes, and repair costs.

Vehicle Info

MakeToyota
ModelCamry
Years2018-2024

DISCLAIMER: This information is for educational purposes only. MechanicGPT is not a licensed mechanic. Always consult a certified mechanic for diagnosis and repair. Improper repairs can be dangerous.